A compact tractor of 18Hp and above will pull the harrow. They can be used for pulling thatch and dead grass from paddocks, for levelling and preparation of seed beds and will also assist in the management of horse and pony arenas. Specification: Working width: 2440mm (48 ) Working length: 2290mm (84 ) Weight: 00kg (220lbs) The standard ring fits over a 50mm ball hitch, optional ball hitch can be fitted.
These mini chain harrows from SCH are suitable for work behind garden tractors of 15hp and above to remove dead vegetation from lawns, paddocks, and large grassed areas. The harrows are suitable for seed and bed preparation; both levelling and covering. They are also extremely useful for the rejuvenation of horse arenas. The working width of these harrows is 1220mm (48 inches), the length is 1650mm (66 inches), and the weight 45kg. Manufacturers 1 year warranty
With 12 carbide-tipped scarifying teeth, the DR Power Grader loosens hardpacked dirt and gravel to remove bumps and washboard and fill in potholes. The rear leveling blade then spreads the loosened material. The result is a smooth driveway thats easier to drive on...and easier on your car or truck! FEATURES: Towing Vehicle: DR recommend using a heavy duty garden tractor with a minimum of 16HP, Utility Tractor or ATV to tow the Grader. Powered Actuator: The actuator allows you to fine tune the up and down motion of the PowerGrader, to adjust for the traction of the towing vehicle, and the hardness and slope of the surface. Weight Tray: Add weight to the DR PowerGraders weight tray to gain extra purchase on hard packed ground. TECHNICAL DETAILS: Working Width: 48in Working Depth: 9/16in above to 9/16in below ground level Wheel Size: 8in diameter Weight 102kg Manufacturers 2 year domestic, 6 month commercial warranty A drag screen is available as an optional extra for this Power Grader. Breaks up any clumps as the material is being graded. To Watch the DR Power Grader working please click on the link below...
Heavy duty, flexible steel drag screen attaches easily behind the DR Power Grader to break up any clumps that form as the material is being graded. To Watch the DR Power Grader working please click on the link below...
These chain harrows are lighter than the SCH conventional chain harrows (MCH) and therefore are easier to pull by smaller tractors and ATV. The major feature of these chain harrows is that they can be pulled in three different directions to suit the desired effect. The tines of the harrow protrude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas. Working width 1530mm (5 feet). Working length 1480mm (58 inches). Weight 36 kgs. Manufacturers one year warranty
These chain harrows are lighter than the SCH conventional chain harrows (MCH) and therefore are easier to pull by a smaller tractors and ATV. The major feature of these chain harrows is that they can be pulled in three different directions to suit the desired effect. The tines of the harrow protrude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas. Working width 1892mm (6 feet). Working length 2316mm. Weight 46 kgs. Manufacturers one year warranty
The Handy 4 ft drag mat is ideal for leveling or smoothing dirt or gravel. It can be easily attached to the back of a ride on lawn mower, ATV or lawn tractor. When not in use simply roll the handy mat up for easy storage. Mat Dimensions: 4 wide x 5 long galvanised mesh Material : Powder coated frame
The standard 1220mm width chain harrow mounted on a frame which incorporates category 1 three point linkage. The main advantages of this form of mounting is ease of transport, simple and easy clearing of debris from the tines, more manoeuvarable on corners and avoids over harrowing on the headlands. Working width: 1200mm (48 ) Working length: 1178mm (70 )
