Rain jacket in a stylish model made of PU/PVC. Adjustable buttoning at the front and extra long arms with press studs. Extended back with rain lip. One size.
Rain jacket made of strong nylon and a yoke of PU/PVC. Mesh material under the yoke that will provide for good ventilation. A well-protected breast pocket with zip under the yoke. Welded seams. The jacket has extra long sleeves with press studs and an extended back with rain lip. Corduroy collar with Velcro closure and a long zip protected by a flap with press studs at the front. Meets requirement of EN 343.
Rain trousers made of strong nylon on the front and PU/PVC at the back. 10 cm mesh material around the waist for good ventilation. Elastic waist with drawstring for better comfort. Zipper at the outside lower part of the leg for easier âon-offâ. Meets requirements of EN 343. Dark blue
A new ergonomic harness from Husqvarna that distributes the load optimally between shoulders, chest and back. Wide padded straps and wide back plate reduce the load on the upper body. Equipped with a plain hip pad that has a travelling connection so that the machine can be manouvered with a minimum of body movements, further saving the users back.
Hearing protectors with FM radio with possibility for GSM connection. The Bluetooth technology with wireless communication represents a higher safety. Connect your bluetooth-equipped mobile phone to the hearing protectors. The phone can be carried in your pocket or in your bag, max. range 10 m. For incoming phone calls it is easily folded down into âtalkingâ position and by a simple touch on the âtalkâ button the phone is activated. The microphone is noise compensated, which means that it works in a noisy environment.
Professional helmet complete with visor, hearing protection, sun peak and neck guard. Replaceable lining and possibility for ventilation holes. The visor provides good visibility and good water run-off. Reinforced visor holder, which makes the helmet more stable.
The Husqvarna Protective Chaps are one size, which are easy to adjust to height and waist size. Excellent protection for the occasional chain saw user. 9 layers of protection at the front + 5cm and a rear zip. Polyester, elasticated ankle tie and can be equipped with a widening band to increase the inner diameter. Size: one size fits all.
A chainsaw safety kit from Husqvarna comprising the basic protective equipment needed when using a chainsaw. Includes chaps, helmet and gloves. One size fits all.
Design allows 20% adjustment of pressure. Lightweight, flexible padded headband. Protectors have same specifications as those used on the Husqvarna helmet.
Hearing protection with mesh visor. Cover between visor and headband prevents grass, chips and rain from entering from above. Complete as shown. Meets requirements in EN 352-1 ans EN 1731.
Forest jacket made of water repellent 100% micro polyester at the front upper part and back. Ventilation zipper under the arms and new cutting of arms for improved movement. Features: Back is extended for higher comfort Collar made of corduroy for high comfort Cordura reinforcement for higher durability Mesh material for comfort and ventilation Four front pockets with zipper Special inside pocket for mobile phone Adjustable waist for perfect fit Mesh material for comfort and ventilation Washing temperature: 60 ° C / 140 ° F
These Husqvarna Chainsaw Gloves have a knitted cuff, a shaped and reinforced palm, and offer saw protection in the prone hand. Their exposed areas are seamless and reinforced with leather. Their backs are constructed from water-repellent polyester. They have waterproof kid leather palms and are hard-wearing. CE approved. Note: these are the SMALL SIZE gloves.
Rain jacket designed for garden professionals. Made of PU/PVC. Open in the waist with gusset and press studs so that the jacket can be lifted over the seat when using a Rider or a tractor. Long model that protects the legs. Three front pockets with closures. Roomy hood, even while wearing hearing protection.
Glove especially made for arborists. Made in a water repellent kid leather with back of water repellent polyester. Double leather reinforced inside to better stand against when working with ropes. Made in a âshortâ model for better comfort.
Complete with visor, hearing protectors and neck guard. Replaceable lining and push-out air vents. The visor provides good visibility and goos water run-off. The hearing protectors can be adjusted vertically and sideways and ensure good noise exclusion, despite low pressure. The helmet has been tested and meets the requirements in EN 397. It also complies with requirements for rigidity, molten metal and low temperature (-40 degrees C). Hearing protectors have been tested and meet the requirements in EN 352-3. The visor has been tested and meets the requirements in EN 1731.
Husqvarna Technical 24 high quality water proof leather boots with chainsaw protection in Class 2, 24m/s. The Sympatex membrane makes these Husqvarna boots 100% waterproof yet still breathable between the liner and outer fabric. Easily adjustable with hooks, quick lock at the top and 5 hooks for quick adjustment. Extra hook at front of tongue for better position of tongue when walking. Lower part of boot from sole and up is reinforced with rubber as extra protection. Pull strap at back.
Leather boot with good stability and fit. Made of polyurethane treated leather. Seams of heavy-duty Kevlar thread for significantly increased strength. Durable and waterproof polyurethane sole extends up to the upper part of the shoe. Inner sole of shock-absorbent Ergothan prevents stress injuries. Available in Sizes: 39 (UK 51/2-6), 40 (UK 61/2) 41 (UK 7-71/2), 42 (UK 8), 43 (UK 9), 44 (UK 91/2-10), 45 (UK 101/2)), 46(UK 11-11 1/2), 47 (UK 12).
These are protective trousers with 9 layers of protection in front of leg + 5cm. Waist trousers with saw protection for the demanding occasional chain saw worker. A somewhat simpler model but with the same protection as the other models. Made of 100% heavy duty polyester at front and 100% knitted polyester for better ventilation at back. Two front pockets and one back pocket with zipper. Reinforced protective material inside with nylon.
Protective waist trousers with saw protection. A bit less features than our Technical trouser, but with the same protection. Made of Cordura at front and 100% micro polyester at back. Reinforced protective material inside with nylon. Features: Back is extended for higher comfort One pocket with zipper on the back Two front pockets with zipper Washing temperature: 60 ° C / 140 ° F
Husqvarna chainsaw user kit which includes Forest Bag, Helmet with mesh visor and earmuffs, Gloves, Leggings, and Forestry Boots. Please state boot size required when ordering.
The new Protective waist trousers are lighter and more comfortable due to the new saw protection material and are made of a ventilating material with 4-way stretch. The material is stretchable in all directions which provides for high durability and freedom of movement. Perfect for the professional chainsaw user. The trousers have been reinforced in Aramid material on the knees and with Cordura nylon on the lower front part of the legs. The waist has a wide elasticized band and a raised back for extra comfort. Features: 4-way stretch material for great comfort Saw protection up to 20m/s Mesh material for comfort and ventilation Ventilation zippers with mesh inside Zippers for ventilation and mesh inside Reinforcement with ventilated material Extended back in orange for comfort and visibility Aramid reinforcement for higher durability Back leg reinforced for higher durabilty Washing temperature: 40 ° C / 104 ° F Approved according to EN 381
Hearing protector with perspex visor. Protection for grass clearing and other tasks. Cover between visor and headband prevents grass, chips and rain from entering from above. Meets requirements in EN 352-1 and EN 166.
