Oregon Chaps Type A. Safety Requirements CE, Euro tested, EN381 Class 1, 20m/s Protection: Style A Material, Front: 100% Polyester Material, Back: 100% Polyester Ventilation features: Open at Back Water Resistant: Yes Wind Resistant: Yes
These protective gloves are ideal for prolonged periods of strimmer, brushcutter or hedgetrimmer use. The gel filled points on the palm reduce machine vibration, enabling longer working times and reducing operator fatigue. Note: these are the medium size gloves.
A clear polycarbonate face protector/muff combination with single point adjustment, ear defenders rated to 25dB SNR and a padded head band for added comfort. CE approved.
A waist jacket specially designed for clearing and garden work. Fitted with mesh lining on the inside for better ventilation. Four front pockets, designed not to be in the way of the harness. Mobile phone pocket on left sleeve. Pockets on the insides of the shoulders, into which thermoplastic protection can be inserted. This is to protect the shoulders during extended periods of clearing and brushcutting work. Full-length front zip, high collar, cuffs with press studs. The material is Taslan-treated Oxford cloth.
Safety Requirements: CE, Euro tested, EN381 Class 1, 20m/s Protection Style: A Material, Front: 100% Polyester Material, Back: 100% Polyester Ventilation features: Open at Back Water Resistant: Yes Wind Resistant: Yes
Hi-fi quality stereo radio. Automatic station locator. Can be locked in mono position when required. Memory that stores the most recently used stations and volume. Low energy consumption, automatic shut-off after 4 hours, which saves batteries. All features are controlled by three distinct buttons, which makes for easy and safe operation. Low battery warning. Meets requirements of EN 352-1, 352-3.
A bump feed head to fit Homelite, Ryobi or McCulloch small grass trimmers. Recommended for machines with engines smaller than 30cc. Accepts round or star profiled trimmer lines up to 2.4mm in diameter.
This Honda 820mm hedgetrimmer attachment is to fit the Honda UMK 425, Honda UMK435E, Honda UEET and Honda LEET brushcutters only. Blade length : 550mm Head articulates 180 degrees.
For trimming and garden work. Fitted with mesh lining on the inside and a zip at the back for better ventilation. Pocket for extra thermoplastic hip and knee pads for work with a clearing harness and when working on knees. Outer material up to knees in hardwearing Cordura nylon. On the inside, up to the knees, there is extra padding for protection against cuttings and flying stones, two front and back pockets. Leg pocket with flap. The material is Taslan-treated Oxford cloth.
