The levelling lute is an extremly useful attachment to the P3 system for levelling out new seed beds and for the even distribution of top dressings. The lute can also be used on gravel drives, or to level out mole hills on the lawns.
The brush attachment consists of two rows of stiff, closely woven bristles. The bristle pressure on the ground can be altered by adjusting the two depth wheels on the carrier frame. The brush attachment is ideal for brushing in top dressing, disperal of casts and if required removal of dew and stripping
The slitter attachment for P3 turf care system has 10 free floating discs with springs between each disc to keep the discs to the correct spacing. Up to 125mm of slit depth can be achieved with added weight. Working Width: 1500mm
The roller fixes to the underside of the carrier frame. Ballast can be added up to the limit of your three point linkage lifting capacity. Working Width: 1530mm
Consisting of two rows of spring tines. These tines will delve into matted grass areas quickly and efficiently teasing out the thatch. The rake can also be a very useful tool in helping to keep certain menage surfaces in good order and freshening gravel drives. The depth wheels fitted to the carrier frame allow adjustment to the tine pressure on the surface being scarified. Working Width: 1500mm
The Aerator attachment for P3 grass care system has 10 discs each carrying 6 areation spikes. The spikes drive into the ground giving up to 125mm penetration with added weight. The opening up of the surface relieves compaction, improves drainage and allows air and feed to reach the root formations quickly. Working Width: 1500mm/ 60 inch
The P3 carrier frame is attached to the tractor by the three point linkage system. The frame has a built in weight tray in order that top weight may be added to achieve the penetration required of the fitted attachment. Two adjustable screw operated wheels will hold the frame to the correct working depth and pressure.
